FireCore‘s Seas0nPass has been just updated to provide an untethered jailbreak for Apple TV 2 running the latest 5.0.2 (iOS 5.1.1) firmware. Released yesterday, this minor software update for the 2nd and 3rd generation Apple TV only includes an Australia-specific issue with Parental Controls, no new features have been added.

All of the most popular Apple TV plugins, like XBMC, Plex, Media Player, nitoTV, Rowmote, Last.fm, Couch Surfer and Weather are currently supported on 5.0.2 (Remote HD and Overflow are not yet working and require an author update for 5.0.1 compatibility).

If you are not in Australia, there is no need to update to 5.0.2 but if you have accidentally updated or bought an Apple TV 2 with 5.0.2 already installed, you can jailbreak it by following this tutorial.

NOTE: The current version of Seas0nPass doesn’t provide a jailbreak for the Apple TV 3.

Here is a step by step tutorial on how to untether jailbreak Apple TV 2 5.0.2 using Seas0nPass:

Pre-launch checklist

1. Download and install the latest version of iTunes (check for updates through Software Update located in Apple menu).
2. Download Seas0nPass for Mac [10.6 or later] or Windows [XP or later].
3. A micro USB cable will be required to complete the jailbreak.
4. Disconnect any iPods, iPhones, and iPads from your computer.

Jailbreaking

Step 1: Unzip the ‘Seas0nPass.zip’ file and launch Seas0nPass.

Step 2: Select the ‘Create IPSW’ button to start the jailbreak process.

Step 3: The latest Apple TV software will be downloaded and used to create a custom ‘jailbroken’ software file.

Step 4:When prompted, connect your Apple TV using a micro-USB cable (leave power disconnected).

Once the light on the front of the Apple TV begins to flash rapidly, point the remote at the AppleTV and hold both the MENU and PLAY/PAUSE buttons for 7 seven seconds.

Note: This step will require the silver (aluminum) Apple TV remote that was included with the ATV2. The older, white (plastic) remotes will not work.

Step 5: iTunes will open automatically and start the restore process.

Step 6: iTunes will confirm the restore when complete – your Apple TV is now jailbroken.

Note: To confirm the jailbreak was successful a (temporary) red FC logo will appear in the lower right corner of the screen – as shown below.

Enjoy!

Now you can:

• install XBMC 11.0 Eden and all the great XBMC addons
• watch Hulu
• install IceFilms
• install aTV Flash (black) and Media Player
• and much, much more!

Be sure to follow us on Facebook, Twitter or Google+ for the latest updates on Apple TV 3 jailbreak status.

The post How to jailbreak Apple TV 2 5.0.2 (iOS 5.1.1) using Seas0nPass (untethered) appeared first on Apple TV Hacks.

Seas0nPass jailbreaking tool has been updated today to provide an untethered jailbreak for Apple TV 2 running the latest 5.0.1 (iOS 5.1.1) firmware. All of the most popular Apple TV plugins, like XBMC, Plex, Media Player, nitoTV, Rowmote, Last.fm, Couch Surfer and Weather are currently supported on 5.0.1 (Remote HD and Overflow are not yet working and require an author update for 5.0.1 compatibility). The new Apple TV 2 untethered jailbreak has been successfully tested by nitoTV.

The current version of Seas0nPass doesn’t provide a jailbreak for the Apple TV 3.

Here is a step by step tutorial on how to untether jailbreak Apple TV 2 5.0.1 using Seas0nPass:

Note: If you’re already running a tethered version of 5.0.1 you will need to re-jailbreak using Seas0nPass to take advantage of the new untethered version.

Pre-launch checklist

1. Download and install the latest version of iTunes (check for updates through Software Update located in Apple menu).
2. Download Seas0nPass for Mac [10.6 or later] or Windows [XP or later].
3. A micro USB cable will be required to complete the jailbreak.
4. Disconnect any iPods, iPhones, and iPads from your computer.

Jailbreaking

Step 1: Unzip the ‘Seas0nPass.zip’ file and launch Seas0nPass.

Step 2: Select the ‘Create IPSW’ button to start the jailbreak process.

Step 3: The latest Apple TV software will be downloaded and used to create a custom ‘jailbroken’ software file.

Step 4:When prompted, connect your Apple TV using a micro-USB cable (leave power disconnected).

Once the light on the front of the Apple TV begins to flash rapidly, point the remote at the AppleTV and hold both the MENU and PLAY/PAUSE buttons for 7 seven seconds.

Note: This step will require the silver (aluminum) Apple TV remote that was included with the ATV2. The older, white (plastic) remotes will not work.

Step 5: iTunes will open automatically and start the restore process.

Step 6: iTunes will confirm the restore when complete – your Apple TV is now jailbroken.

Note: To confirm the jailbreak was successful a (temporary) red FC logo will appear in the lower right corner of the screen – as shown below.

Enjoy!

Now you can:

• install XBMC 11.0 Eden and all the great XBMC addons
• watch Hulu
• install IceFilms
• install aTV Flash (black) and Media Player
• and much, much more!

Be sure to follow us on Facebook, Twitter or Google+ for the latest updates on Apple TV 3 jailbreak status.

The post How to jailbreak Apple TV 2 5.0.1 (iOS 5.1.1) using Seas0nPass (untethered) appeared first on Apple TV Hacks.

Seas0nPass jailbreaking tool for Apple TV has been updated to version 0.8.4 that supports a tethered jailbreak for Apple TV 2 5.0.1 (iOS 5.1.1). Released this Thursday, Apple TV 5.0.1 (9B206f) adds HD previews for TV shows and movies in the iTunes store and brings fixes to Netflix, AirPlay and Home Sharing.

Here is what’s new in Apple TV 5.0.1:

• iTunes previews: Previews for movies and TV shows from the iTunes Store can now be viewed in HD.
• AirPlay: Fixes an issue that caused some iOS apps to have trouble connecting via AirPlay.
• Home Sharing: Improves the reliability of Home Sharing connections.
• Netflix: Addresses an issue affecting Netflix login and navigation.
• Stability and performance: Includes fixes for issues affecting stability and performance.

FireCore, the developer behind Ses0nPass, also said on Twitter that Apple TV 3 jailbreak is still in progress.

You can jailbreak Apple TV 2 5.0.1 with Seas0nPass by following this tutorial.

The post Jailbreak for Apple TV 2 5.0.1 released. Apple TV 3 jailbreak still in progress appeared first on Apple TV Hacks.

FireCore, the company behind Seas0nPass jailbreaking tool for Apple TV, said on its blog that the work on the jailbreak for Apple TV 3 and the untethered jailbreak for Apple TV 2 5.0 is still underway:

We’ve had some encouraging reports come in over the past few days. However, it’s still too early to give any kind of ETA but we hope to have more news soon.

Back in March, Apple TV hacker and developer nitoTV shared some of his thoughts on the Apple TV 3 jailbreak. According to him, without an A5 bootrom exploit being found, an Apple TV 3 jailbreak “will be an uphill battle.” That’s mainly because the “attack surface” on Apple TV is much smaller. He wasn’t expecting the jailbreak to come anytime soon.

According to MuscleNerd, the new 1080p Apple TV will likely be the most secure of the Apple’s latest devices. That’s because geohot’s limera1n bootrom exploit, used to jailbreak Apple TV 2, doesn’t apply to ATV3.

Be sure to follow us on Facebook, Twitter or Google+ for the latest updates on Apple TV 3 jailbreak status.

You may also want to read:
aTV Flash (black) 1.5 for Apple TV 2 is live
How to install IceFilms on your jailbroken Apple TV
XBMC 11.0 Eden for Apple TV 2 5.0 (iOS 5.1) released (+how to install tutorial)
How to jailbreak Apple TV 2 5.0 (iOS 5.1) with Seas0nPass (tethered)

The post FireCore: Work is underway on Apple TV 3 jailbreak and Apple TV 2 5.0 untethered jailbreak appeared first on Apple TV Hacks.

So you caved in and bought the new 1080p Apple TV 3 and were horrified to discover that you cannot jailbreak it yet. Perhaps you were fortunate enough to find your older Apple TV (1st or 2nd gen) sitting in a dark damp corner of your closet underneath your old PlayStation. Regardless of which device you are fortunate enough to have, you will need one simple skill in order to take full advantage of your XBMC experience.

XBMC comes with the unique ability to install extra tools within the confines of its system. This means that once XBMC is installed you can add new add-ons/plugins to your Apple TV in order to give it some new features such as streaming live television, streaming movies from external websites, Pandora, Sports Channels, and much more.

Installing, and using, XBMC add-ons and plugins is a very simple process that can sometimes intimidate newbies, or first time users. The good news is that, by the end of this post, you will be able to install, uninstall, and find any XBMC tools you want within the confines of your Apple TV (1 or 2). Before we begin, let’s go over what we need:

• Computer
• Add-On/Plugin Source
• Apple TV (1st or 2nd-generation)

XBMC does come with many add-ons/plugins preinstalled in its database for you to install and play with. If you would like to use these specific tools simply skip ahead to STEP #9. If, on the other hand, you would like to add specialized add-ons/plugins such as IceFilms, NaviX, SuperTV, FastPassTV, 1Channel, or even Watchseries you will need to follow these instructions from beginning to end.

The first step would be to find the add-ons you want to install. You can search XBMC’s forums for things like skins, movie scrapers, music add-ons, picture add-ons, and more.  Once you find what you want… download the .zip file to your computer and remember file location you save it to.

The next step would be downloading an SSH client onto your computer. This tool will enable you to browse the Apple TV menu from your computer.

• Windows – PuTTY or WinSCP
• MAC – CyberDuck

Once you install these tools, you will need to connect the SSH client to your Apple TV:

1. Open XBMC on your Apple TV and navigate from your Home Screen to Settings > System Information. You need to locate and take note of your system’s IP address:

2. You now need to open your SSH Client. You will likely be met with either an option to open a Connection, if so select this option, or a group of boxes requiring input. Fill out the boxes using following:

• At the top you will likely see a drop down menu that says “File Transfer Protocol.” Here you will need to select the option that says “SFTP” or “SSH”
• Server: Here you need to enter the IP address of your Apple TV that we located earlier.
• Username: root
• Password: alpine

3. Click on the “Connect” button and you will find yourself inside the File System of your Apple TV.

4. Next you will need to navigate to the location that XBMC associates as its Home Page. This location is found @  “/User”

5. Now we need to find the add-on that you download earlier in this tutorial. Once you have located the file, you will need to drag it from your computer into this file location as seen below. In this case I have copied XBMC’s repo from my desktop into the file location provided.

Now that we have copied all desired items from the computer into the ATV we are now ready to put down the computer and pick up the ATV remote. The rest of these steps take place inside of your XBMC installation:

Installing  Add-ons & Plugins

1. Open XBMC on your Apple TV and navigate from your Home Screen to the System Menu. From there you should see menu options similar to what is shown below.

The post How to install XBMC add-ons and plugins on Apple TV appeared first on Apple TV Hacks.

Just in case you were unaware, XBMC has finally released an Eden copy of XBMC for your old Apple TV (1^st generation). Though this 1^st gen device is not the easiest to load XBMC on to, it is by no means impossible. If you simply follow these steps, from beginning to end, you will be enjoying unlimited multimedia goodness in no time.

Before we start, there are some basic requirements that are absolutely necessary for this installation process.

• Computer (Windows or MAC)
• USB port and ATV USB Creator  (grab it from the link provided and download it to your machine)
• A Flash Drive (USB Stick) that is a minimum 512MB.
• A 1^st Generation Apple TV that has been updated to the latest software, version 3.0.2!

BE SAFE: To be on the safe side, make sure that you have unplugged all other USB drives from your computer before continuing. USB Creator does erase whatever drive you are using, so you want to make sure there is nothing vital loaded on any devices plugged in once we begin.

1. Download the ATV USB Creator and save it onto your system.

2. Insert your flash drive into your computer and format it to FAT32. Be aware that this step will erase anything located on your USB stick.

3. Open and run the ATV USB Creator software that we downloaded in step #1.

4. Once the software opens up, select the following options:

– Where you see “Choose an Installation” select “ATV-Patchstick”

– You don’t need to do anything for “Download AppleTV Update DMG or Choose a DMG”. ATV USB Creator will automatically download this file from Apple’s servers, so you don’t need to do anything there.

– For “Installation Options” you should not need to change anything. “AppleTV version 3.x” should already be selected, and there should already be check marks for “ssh tools”, “bin utils”, “SoftwareMenu”, and “XBMC/Boxee for Mac”

– For “USB Target Device” select the USB drive you plugged into your computer in step #2. You may need to hit the refresh button for it to show up. Now you can click on “Create Using ->”

– When the USB drive patchstick is done being created you can then remove it from your computer.

5. Unplug your Apple TV and insert the USB drive patchstick into the back of your device.

6. With the flash drive plugged into the back of your Apple TV, plug the power cable back in. As the Apple TV begins to power up it should now be loading from the flash drive. Now we will wait for the picture of a Penguin (Tux) sitting on an Apple TV. If you do not see this picture when you boot up, and the Apple TV 1 just boots up normally, you likely need to create a new USB drive patchstick using a different USB drive (preferably using a different brand). This problem isn’t often, but it does happen.

7. After the installation is finished, the screen will say that you can reboot. When you see this screen, remove the USB drive patchstick and then unplug (& then) re-plug the power chord to your Apple TV. This will reboot your device.

8. You now have ALL KINDS OF GOODNESS installed on your Apple TV. This is most noticeable in the fact that you now have a new option on your HOME SCREEN Menu Bar named “Launcher”

9. From your Home Screen, navigate to the option labeled “Launcher”. Once there continue to “Downloads”, and then select XBMC. This may show more than one entry for XBMC, if so, select the option that says “Stable”.

10. If you are one of the lucky people who have opted to install a new Crystal HD card you should visit stmlabs.com to get more information on Crystalbuntu. It is a different software… that is installed in the exact same manner as the steps listed above.

11. Finally, from the “Launcher” section, head “XBMC” in the sub-menu to start XBMC.

12. Enjoy some amazing new features.

umOuch (Andrew Brasher)

You may also want to read:
XBMC 11.0 Eden for Apple TV 2 5.0 (iOS 5.1) released (+how to install tutorial)
How to jailbreak Apple TV 2 5.0 (iOS 5.1) with Seas0nPass (tethered)
XBMC 11.0 Eden for Apple TV – Review

The post How to install XBMC 11.0 Eden on first-generation Apple TV appeared first on Apple TV Hacks.

Just days after the tethered jailbreak of 5.0 for the Apple TV 2 was released, we have XBMC working hard to ensure that we don’t get left behind! If you were one the many users who happened to update your ATV2 firmware to iOS 5.1 you were likely saddened to discover that there was not yet a working version of XBMC 11.0 “Eden”. Well, your day has come. Memphiz and Davilla, a developers and team members of XBMC, has been working hard to patch the issues caused when trying to install XBMC over the latest 5.0 firmware update.

If you are an FireCore fan, and aTV Flash (black) user, you have likely noticed their list of working, and broken, packages:

• Couch Surfer (works)
• Last.fm (works)
• Maintenance (works)
• Media Player (works)
• NitoTV (works)
• RSS Feeds (works)
• Weather (works)
• Overflow (not working)
• Plex (not working)
• Remote HD (not working)
• Rowmote (not working)
• XBMC (not working)

You can clearly see that, via FireCore’s tools, there is currently no option to install a working build of XBMC. Primarily the issue is that the 5.0 jailbreak hit XBMC a bit too late in the game, and iOS 5.1 ended up changing too much to be compatible with the current CYDIA version that is available to the public.

To be fair, this will not likely last long. As soon as there is a stable build released by the team over @XBMC, the folks over at FireCore will have the means to install it to your Apple TV. In the meantime, with a little SSH efforts, you can get XBMC Eden working on your Apple TV 2 yet again.

NOTE WORTHY: Memphiz has mentioned, in the release notes, that there has been at least one example of a problem with this process:

Though there is this case particular case, there are many whom have achieved this installation successfully. It is well worth your time, and efforts, to walk through these steps and get back to enjoying your Apple TV 2!

THE STEPS:

1. Download the following, just in case:

https://mirrors.xbmc.org/apt/atv2/deb/org.xbmc.xbmc-atv2_11.0-3_iphoneos-arm.deb

2. Open your terminal application (or PuTTY on Windows)

3. SSH into your Apple TV 2, by using the following command (make sure you use the IP address of your Apple TV. This is located in the Network information under the Settings menu on your Home Screen):

ssh root@YOUR.ATV2.IP.ADDRESS

You will be asked for a password: default password is alpine

4. Continue to enter, or simply COPY & PASTE the following commands (ONE LINE AT A TIME):

This will install the official CYDIA version or XBMC… which installs all the needed dependencies. It then updates the install with the version of XBMC Eden that we downloaded in Step #1.

• apt-get update

• mkdir -p /Applications/AppleTV.app/Appliances

• apt-get install org.xbmc.xbmc-atv2

• mkdir -p /Applications/XBMC.frappliance

• wget https://mirrors.xbmc.org/apt/atv2/deb/org.xbmc.xbmc-atv2_11.0-3_iphoneos-arm.deb

• dpkg -i org.xbmc.xbmc-atv2_11.0-3_iphoneos-arm.deb

• rm org.xbmc.xbmc-atv2_11.0-3_iphoneos-arm.deb

5. Enjoy your working build of XBMC!

If you have any problems, issues, or concerns you can simply log into forum.xbmc.org to find support for this specific build.

Our tutorial on how to jailbreak Apple TV 2 5.0 with Seas0nPass can be found here.

umOuch (Andrew Brasher)

You may also want to read:
How to jailbreak Apple TV 2 5.0 (iOS 5.1) with Seas0nPass (tethered)
nitoTV: Apple TV 3 jailbreak will be an uphill battle
XBMC 11.0 Eden for Apple TV – Review

The post XBMC 11.0 Eden for Apple TV 2 5.0 (iOS 5.1) released (+how to install tutorial) appeared first on Apple TV Hacks.

FireCore’s Seas0nPass has been updated to provide a tethered jailbreak for Apple TV 2 5.0 (iOS 5.1). Tethered jailbreak means that every time there is a need to reboot your Apple TV, you will have to connect it to a computer. Functionally, both tethered and untethered jailbreak are identical.

XBMC, Plex, Remote HD, Rowmote and Overflow plugins are not yet working on AppleTV 5.0. Media Player, Couch Surfer, nitoTV, Last.fm, Weather, RSS Feeds and Maintenance are already supported. Non-working items require an author update for 5.0 compatibility.

The current version of Seas0nPass doesn’t provide a jailbreak for the Apple TV 3.

Here is a tutorial on how to use Seas0nPass to jailbreak and tether boot your Apple TV 2 on firmware 5.0:

Pre-launch checklist

1. Download and install the latest version of iTunes (check for updates through Software Update located in Apple menu).
2. Download Seas0nPass for Mac [10.6 or later] or Windows [XP or later].
3. A micro USB cable will be required to complete the jailbreak.
4. Disconnect any iPods, iPhones, and iPads from your computer.

Jailbreaking

Step 1: Unzip the ‘Seas0nPass.zip’ file and launch Seas0nPass.

Step 2: Select the ‘Create IPSW’ button to start the jailbreak process.

Step 3: The latest Apple TV software will be downloaded and used to create a custom ‘jailbroken’ software file.

Step 4:When prompted, connect your Apple TV using a micro-USB cable (leave power disconnected).

Once the light on the front of the Apple TV begins to flash rapidly, point the remote at the AppleTV and hold both the MENU and PLAY/PAUSE buttons for 7 seven seconds.

Note: This step will require the silver (aluminum) AppleTV remote that was included with the ATV2. The older, white (plastic) remotes will not work.

Step 5: iTunes will open automatically and start the restore process.

The post How to jailbreak Apple TV 2 5.0 (iOS 5.1) with Seas0nPass (tethered) appeared first on Apple TV Hacks.

FireCore’s Seas0nPass jailbreaking tool has been updated for Apple TV 2 running latest firmware 5.0. It’s still a tethered jailbreak, meaning every time there is a need to reboot your Apple TV, you will have to connect it to a computer. XBMC, Plex, Remote HD, Rowmote and Overflow plugins are not yet working on AppleTV 5.0. Media Player, Couch Surfer, nitoTV, Last.fm, Weather, RSS Feeds and Maintenance are already supported. Non-working items require an author update for 5.0 compatibility.

The current version of Seas0nPass doesn’t provide a jailbreak for the Apple TV 3.

Our tutorial on how to jailbreak Apple TV 2 5.0 with Seas0nPass can be found here. 

You may also want to read:
nitoTV: Apple TV 3 jailbreak will be an uphill battle
XBMC 11.0 Eden for Apple TV – Review
Yet Another Patent Hints at Apple Preparing a Standalone HDTV

The post Seas0nPass jailbreak for Apple TV 2 5.0 (iOS 5.1) released appeared first on Apple TV Hacks.

Apple TV hacker and developer nitoTV has recently shared some thoughts on the Apple TV 2 5.0 (iOS 5.1) and Apple TV 3 jailbreak. According to him, without an A5 bootrom exploit being found, an Apple TV 3 jailbreak “will be an uphill battle.” That’s mainly because the “attack surface” on Apple TV is much smaller:

There is no built in default web browser, there are less services running, with no web browser and less services running there are fewer places to smoke/fuzz out a vulnerability. For instance, even if the AppleTV 3 was out before the iPad 2 and 4S were jailbroken with absinthe, it would not have been applicable, no mobilebackup to exploit for part of the injection vector.

However, nitoTV is not saying the Apple TV 3 jailbreak is hopeless, it may just take a (long) while until the jailbreak is out.

Apple TV 2 5.1 jailbreak

nitoTV has also shared some news on the status of the jailbreak for Apple TV 2 running the latest software version: as of right now the jailbreak for 5.1 on the Apple TV is limited to a tethered jailbreak (not public yet), nitoTV works about 95%, XBMC is broken and “there is still work to be done, there are some bugs to sort out.” But, as the hacker admits, the tethered jailbreak is only part of the problem:

Right now we are still busily sorting out legacy and compatibility issues to make sure all roads still go through beigelist when loading third party appliances. I’m not certain how long it will take to merge the differences between beigelist and espresso, hopefully, not much longer.

Well, as they say, everything comes to him who waits… and, as far as we are aware, the waiting may be over soon!

Remember that if you have updated to 5.0 but you have the SHSH blobs saved for 4.4.4, you can easily downgrade to older firmware using FireCore’s Seas0nPass.

[image: nitoTV]

You may also want to read:
The new 1080p Apple TV 3 proves to be a tough cookie to crack
Yet Another Patent Hints at Apple Preparing a Standalone HDTV
XBMC 11.0 Eden for Apple TV – Review
AirParrot adds 1080p support for the Apple TV 3

The post nitoTV: Apple TV 3 jailbreak will be an uphill battle appeared first on Apple TV Hacks.